Custom Low Rider Pocket Clips:

Pocket view. Note how the knife disappears in the pocket. This answers the question of why folks want a low rider. My clip is less noticed due to difference in 'foot print' size also. 

STR Low Rider mounted

Factory clip set up 

Superimposed view of my clip over the factory clip for this model

Close up of STR Low Rider

Side view STR Low Rider

Side view factory clip

One of the things I get asked to do more than anything else is to make one of my custom low rider pocket clips fit a favorite everyday carry knife for a customer. This is one of the few things I do involving production folders anymore and something I will always do at least as long as I can. As many of those following my work know, I used to do quite a bit of modification work on production folders as shown here in my blog in past posts. Most all of those production knife jobs have been discontinued by me with the exception of my custom pocket clips.  I am a pocket clip fan and I enjoy making these for folks when it involves knives already equipped with a pocket clip. Some models such as the Spyderco Military, and Para Military 1 and 2, the Kershaw Leek, or Junk Yard Dog II folder (shown) and the Benchmade Mini and full size Griptilian folders are frequent requests that come my way.

For most of these above models I can make a clip without the need for having the knife shipped to me because I have some of my own folders in these same models which can be used to make pocket clips for others. If someone owns something other than these knives I may need the knife in question to do the pocket clip. It depends on several things I need to know. Sometimes it helps to see pictures of a knife in question and from all sides to decide if one of my clips is a possibility. Pictures can tell me a lot usually so if you have some of your knife or a link to your knife model that helps me to determine if we can proceed or not on a pocket clip project.

This JYDII folder here was set up to take one of my custom fit low rider pocket clips made from .045 thick titanium. I use the same knife maker grade of titanium for my clips as I do for my knives. You can see the side shots for both factory and upgrade to my clip as well as the difference in look and fit from one to the other. I try whenever possible to use the factory pre-threaded holes already in the knives. In the event I have to drill and thread new holes for mounting the clip somewhere other than the factory mountings I would need the knife. This of course is problematic when I have to modify a knife permanently because it voids the factory warranty but also its something that needs discussed because there are some models I simply won't drill and thread into for various reasons. Pinned together knives are some I'm not really fond of working on even though you can find some that I have done. For knives that never had a pocket clip it can also be problematic. Some knives simply won't allow for a clip to be installed due to how they are made or the materials they are made from. Each case varies so contact me if you have questions about yours.

Anyway, this has been something I've been wanting to do ever since this customer of mine sent me these pictures and posted them on my forum to show what the before and after for one of my low rider or fold over style pocket clips did for his Kershaw knife. As you can see from the pocket shot the knife buries deep and completely disappears with one of my clips. This is not always the case as some models won't allow me to make the clip such that it can go clear to the end of the knife to do the fold over due to their specific design but no matter it is still better for how it sits than a factory set up. Sometimes its necessary to weave the stem of the clip between the lanyard hole and a button lock or some other mechanism which forces me to stop the clip short of going to the end. At other times if it looks like the fold over would overhang off the spine I am forced to fold it over before it would overhang to keep the clip as invisible in the hand as possible. So in these cases I cannot bury a knife as deep as one may envision but usually its pretty close.

Some customers elect a bead blasted finish as shown here. Bead blasted is the most popular request. Other customers elect to have me anodize their clip a color, usually khaki or brown, or perhaps blue jean blue to allow the clip to blend with slacks a little better in the work place giving their carry knife somewhat of an urban camo thing going on. Some customers that carry larger knives prefer to have a smaller than factory clip made to fit their knife. This gives the illusion that the knife they carry is much smaller than it really is. So occasionally I'll get an order for an almost "pen" looking pocket clip rather than one as large as that shown.

If you navigate my blogger a bit using the menu to the right you can find older posts I did on my low rider clips also, both in May and August of 2010. However, if it interests you further you can see still more of my work in my forum at http://www.bladeforums.com/forums/forumdisplay.php?f=810 in the makers section. Once on my forum, just find the pinned posts at the top pf the page somewhere with the other pinned posts there titled "Low Rider Clip Picture thread" or "The Picture Thread" and you can see more. Both of these threads and the other pinned posts are always there on page one somewhere at the top of the page on my forum so they'll always be easy to find in the event you want to see a picture again or see what new pictures have been added. Lastly, if you need or want to get in touch with me about how to get one of my clips for yourself simply go here and fill out and print one of my work order forms and once I get it I'll do the rest or contact you if I have any questions. http://www.bladeforums.com/forums/showthread.php?t=525771
For the record I do have a second forum on http://knifedogs.com/forumdisplay.php?33-STR-s-Back-Yard-Dog-House that also has additional pictures in a separate gallery.

Thanks for stopping by my blogger.
STRs

V Grind Hammer Forged White Steel Kiridashi Liner Lock In Textured Green G10

What can I say. I liked the folder like this one that I did for my sister so much I decided I had to have one for myself. :-)

Same specs just slightly thicker G10 and a V grind blade instead of the one side grind model. I equipped mine with a pocket clip for right hand tip up carry and used black screws for the clip since I'm out of the shiny ones. Mine weighs more than the one for my sis which is the orange one right below this green one I did for myself. As shown this one weighs in at 3.5 ounces.

Just a reminder to those of you new to my blogger, drag your mouse on any picture and click on it through out my blog and you can bring it up to full size. 

Thanks for looking.

STR

Hunter Orange Left Handed Japanese White Steel Kiridashi Folder

My sister said to me that she really liked the Kiridashi I did for a customer when she saw it over on my Face Book account. She hinted that she'd like to have one for her birthday, 'to match her kitchen knives' but I know she really just wants it because its by her big brother. :-)

Anyway, being that she is a south paw (lefty) I figured it would be a good excuse to use this right hand grind blade since the smooth side of the blade is on the correct side to roll along on the detent ball in the lock. I assume most viewing here know that these style of folding knives have little ball bearings in the locks. These aid smoothness in the action and keep the blade tip down during carry preventing the blade from opening by gravity. I learned doing the V grind model and some past ones that the ball can feel somewhat grainy for a time if you don't do this so to me it was the perfect match up to have this blade laying around and a project it fit right into. This actually turned out quite well and it answered a question I had in my mind as to if I could make this blade work in my BUSSTR folder platform as well as my He-Man folder model which I did earlier for some folks and posted on other pages.

This is my first liner lock using one of these Japanese White Steel blades.
I can't say exactly what it is this hammer forged look does for me but I sure do like it! Its a bit of a challenge to make a differentially hardened blade work in any integral style folder design but when you do get it I must say its pretty dang nice. I used textured hunter orange G10 on this one and its .080 thick so it made for a light weight thin folder. The liners are .070 titanium on this one and the weight is 2.9 ounces. Its 4 and 5/8" closed and sports 3.125" of blade length when opened. The grind is right handed as I said on this one but that just means my left handed sis can experience what the rest of the world has been experiencing with Emerson knives and other chisel grind knives for years. I have a hunch she'll like it. Happy B-day Sis!

Thanks for looking.

STR

Sod BUSSTR Frame Lock

EDIT: I want to add right here at the top since it has been mentioned by some that on the 3rd of Oct. 2010 Howard Viele contacted me after I reached out to him on Facebook where we are both friends. In his contact he granted me permission to do his trademarked three hole pattern on the 8 blades and pocket clips I have like the one shown in this post. Thanks Howard. 
As a youth I always loved my CASE Sod Buster folders. As some of you guys that read here often know I have been making this BUSSTR folder for some time now offering both a liner and frame lock version of it with the frame lock being made from the 'Tac Ti' sheets of textured titanium I get from Tracy at USA knife maker supply. The only difference between this here model and my original is that the original usually had a clip point blade in it like all those shown here in my blog in older posts. For a change of pace I thought it was time to use one of these Soddie blades to see what it would come out like. This here is the first one using one of these blades. SOD Busters are such great knives in the field. They are so good for small game and food prep jobs that its hard not to like them if you are any kind of an outdoorsman at all. 
When my friend Dave at Great Lakes Waterjet suggested I do a Sod Buster blade shape in my BUSSTR folder I wondered to myself why I didn't think of that myself because I loved the idea and as a youth I carried one for  quite a few years going through high school. In my home town back in West Virginia where I grew up the schools still close for the first week of deer season to this day! It makes sense if you knew the area though cause there wouldn't be any teachers to teach school anyhow since they'd all be huntin! :-)  So, you can see why such a portable butcher shop blade like this would be a great friend to a guy like me growing up in the hills where we depended on the meat we bagged each year. I realize these days that you young whipper snappers skip school to go to the video game stores but in my day we skipped to go huntin'. Such was life where I grew up. 
Anyway, with my friend Dave's help I got my blades to use in the SOD Buster shape. Dave cut these patterns out for me from my sheets of 12C27 stainless steel and after I got em back I went to work and Peters Heat treat service did up the blades for me to 60 Rockwell hardness. Shown here are some of the recent folders I've done along side this here new one utilizing one of my Sod Buster blades. Each of these other folders shown with my Soddie is described in other posts. 
If you want to read up on those others just scroll down some and you'll find em. They are all 12C27 for the time being. Come later on I'll have some in S30V and D2 as well as the old stand by ATS34 again but for now I'm using up that 12C27 Sandvik steel and folks seem to be liking that a lot so I figure I'll be sticking with that as long as the feedback remains this positive. You know on paper this stuff is not all that impressive but there is something about it that just flat out works and folks like it! I must admit its won me over about as well as my customers. The stuff is great! 

Oh yeah. The blade on this here textured titanium model folder is 3 and 1/4" and the closed length is 4 and 11/16". Its a tad heavier due to the grind and the fact that the body is 1/8" longer than my Clip point BUSSTR. This one weighs 3.7 ounces. As you can see from looking the slab thickness on this model is just over 1/8" at .135 thickness 6Al-4V titanium for each side. The spacer/stand off in the rear is G10 pinned with 1/8" stainless barrels and T-8 torx screws. The pivot is a 3/16" 416 stainless that takes a T-15 torx driver to tighten or loosen and the pocket clip, also made by me is a .045 titanium mounted with 2-56 screws for T6 torx. As usual thanks for looking and stopping by my little neck of the woods. 


I've added two pictures of this that are winter shots. You can tell because the greenery is gone in the background. These show the new hand rubbed finish and scandi grind once it was completed. The first shots shown are still work in progress pics before the blade and edge were finished out. Just FYI. 



STR

BUSSTR Frame Lock Bead Blasted

When I came up with this folder some time ago I decided after doing several runs of them in liner locks that I wanted to do some frame locks in this pattern also. I wanted to do some blades of my own in thicker stock than the original BUSSTR models using those thin blades from Ragweed Forge. This is one of those blades. I selected 12C27 steel for the blade and had it heat treated by Peters Heat Treat Service.  This is a fine shape for field work too and with the sturdy frame built in .135" titanium slabs with some texturing for making it grippy its the cats meow for an outdoor everyday carry knife. This blade has a nice hollow grind on it and is ready for some work.

This folder weighs in at 3.5 ounces, is 4 and 9/16" closed and sports a 3 and 1/4" blade length open and fancy threaded stand off spacers in the rear to gap it just right. This piece runs $350 and is sold. Thanks Zeke and thanks to all for stopping by to visit my blogger.  

STR

One Off Pocket Clips

Every now and then I get asked to do a custom pocket clip application for a folder. Most of these are your everyday run of the mill jobs like just remaking an original pocket clip design for a production folder. In a lot of cases its one that is no longer made by the company they bought it from so when the owner of knife loses or breaks the original clip and needs a new one they'll touch base with me or someone that is also capable of doing it and get one that way to replace the one that broke. Some of the companies like Spyderco and Kershaw as well as a few others have told the customers about me letting them know where to look to get in touch with me. Thats pretty cool actually but anyway, these are kind of unique as opposed to others I do so I thought I'd post em up.

In this case the owner of these knives, both of which are fairly nice production folders, wanted specific needs met for his knives and included some hand drawings of his ideas to give me something to go by. I have some margin for artistic license on most of these and even though thats the case I try real hard to make them as they owners imagine. These came out pretty good I think.

Anyway, thanks for looking.

STR

He-Man Wharny in 12C27

Seen here is the newest one up. This is the last one of the He-Man folders I had on the agenda to get knocked out. Last pic shows what I have left of all I've built lately. Both hunters and both Japanese White steel models are gone and this here Wharncliffe model is for my son who wanted to get one of my knives for his future father in law. This one has a screw down stop pin as opposed to a shoulder type pin and the spacers are plain type straight forward designs instead of milled out on a lathe. Like the others its just over 3" for blade length, about 3 ounces for weight and between 4 and a 1/4" to 4 and 3/8" closed. I bead blasted the entire thing, blade and all and I installed one of my low rider clips on this one. It will be on the way to my son, Brandon here shortly.

Thanks for looking.

He-Man Hunter and He-Man Hawkbill

Two more in my spurt of knife making just up. I actually have a third one I did as well but its needing some adjustment on the contact before it will be ready so I just stuck with the two completed. Once more these are the same pattern with various blade shapes I've come up with to fit into the same handle shape. I tend to like more traditional straight forward designs as opposed to all the fancy smancy curves and grip grooves. To me a straight forward more "Puukko" type handle is more versatile in a multitude of grips making the knife about as easy to use flipped on its side as it is upside down or right side up.

Anyway, this handle appealed to me years ago when I saw a drawing my good friend Dirk Potgieter had done and at first the model I made was similar to the one he did but as things progressed little by little I eventually modified it so much that it is hard to tell its the same general pattern anymore. Hence the He-Man name sake. This one is a very similar knife to the one I used to call my "Ouparator" with some slight improvements to it in how I build it.

The He-Man name comes from the lock which is pretty stout on most of these because all my He Man models come in .095 thickness titanium with very shallow lock cuts to spring the locks or none at all depending on what is ordered. Its a very stout lock and something certainly not for everyone but the trade off is a knife that can be carried without a pocket clip or worry of hyper extending the lock out the wrong way when closing it. It requires a lot of ummmph and a lever to make the bend in this lock so there is no way a thumb is going to change the memory of one once its set believe me. I've got a stout thumb and I can't cause the lock to lose spring memory with my thumb on purpose let alone by accident! :-)

There are other trade offs also. One is it may take a bit more to close one of these locks with no lock cut to spring it easier but the benefit of that is it won't close by accident on you when you have to focus your attention on one to make it close when you want it to. The other is that the lock has so much spring to it that you are not going to be sitting around opening and closing one of these all day like some kind of a knife worry stone nervous habit. I mean you can try but likely it will flat wear your thumb out so its the kind of knife you open when you need it and you use it and put it away. 

Anyway, these again both weigh close to 3 ounces each. Both are 12C27 blade steel heat treated to 60 Rockwell by Peters Heat Treat Service. They are 4 and 1/4" long closed, with slightly over 3 " blade lengths open. The pics say it all as they both stand on some logs out back together. I did both of these once again in the same .095 thickness titanium slab handles and neither one of these has a lock cut in the lock. The locks are solid just like they come and they are some stout locks. Not for everyone I know but for someone wanting a totally unique lock unlike any you'll fine anywhere else well, you are looking at it.

I'm starting to see a pattern here with hunters. It appears that they like carrying deep without pocket clips. You probably noticed that this hunter model, just like the last does not have a clip. The hawkbill however, did get one of my custom made ti low rider clips on it for right hand tip up carry.

The Hawkbill folder shown here is available yet. $250 Correction: This one is SOLD

Thanks for looking. Been a busy few days for me. I'm taking a break. :-)

STR